JT/T 215-2022 水下膠粘劑技術要求和試驗方法

Technical requirements and test methods for underwater adhesives

JIS B 7023:2021 潛水表. 分類和性能

Divers' watches -- Classification and performance

JT/T 824.1-2011 鋼制打撈浮筒.第1部分：建造

JT/T 824的本部分規定了鋼制打撈浮筒的結構及組成、建造要求及出廠資料等。 本部分適用于鋼制打撈浮筒的生產和檢驗。

Steel salvage camel.Part 1: Fabrication

JT/T 824.2-2011 鋼制打撈浮筒.第2部分：保養與維修

JT/T 824的本部分規定了打撈浮筒的保養和維修的要求。 本部分適用于鋼制打撈浮筒的使用。

Steel salvage camel.Part 2: Maintaining and repair

ASTM F1730-96 水上救生投擲包的投擲用標準導則

1.1 This guide covers the recommended procedures for throwing a water rescue throwbag. 1.2 This guide is one in a series of water rescue techniques for the water rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Throwing a Water Rescue Throwbag

ASTM F1728-96(2007) 多人冷水中生存/解救技術用標準規程:擁擠點

This practice establishes a multiple person cold water survival/rescue procedure. All persons who are identified as water rescuers shall meet the requirements of this practice. This practice is intended to assist government agencies, state, local, or regional organizations; fire departments; and rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. The majority of the rescuers performing this technique must be wearing personal flotation devices. These devices should conform to standards set by the appropriate national regulatory authority, that is, the U.S. Coast Guard in the United States, and be in good and serviceable condition. A water rescuer sometimes may be immersed in cold water for prolonged periods of time. They are unable to get to shore or shore is too far away, rescue is not imminent, no boat is available to get into or on top of, and no flotsam is available. The water rescuer needs to assume a defensive posture to conserve heat and increase survival time.1.1 This practice covers the recommended water rescue procedure for performing the huddle position.1.2 This practice is one in a set of self-rescue techniques for the water rescuer.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position

ASTM F1730-96(2002) 水上救生投擲包的投擲用標準導則

This guide establishes a recommended procedure for a throwing rescue to ensure the safety of all water rescuers who may be involved in rescue techniques at a water rescue emergency. This water rescue technique can be utilized from land, boat, or any stable platform. All persons who are identified as water rescuers shall meet the requirements of this guide. This guide is intended to assist government agencies, state, local, and regional organizations; fire departments; rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. The procedure outlined in the document may vary with the number and type of victims, and water conditions.1.1 This guide covers the recommended procedures for throwing a water rescue throwbag. 1.2 This guide is one in a series of water rescue techniques for the water rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Throwing a Water Rescue Throwbag

ASTM F1729-96(2007) 個人冷水中生存/解救技術用標準規程:救助位置

This practice establishes a single person cold water survival/rescue procedure. All persons who are identified as water rescuers shall meet the requirements of this practice. This practice is intended to assist government agencies, state, local, or regional organizations; fire departments; and rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. A rescuer needs to be wearing a personal flotation device to perform this technique. These devices should conform to standards set by the appropriate national regulatory authority, that is, the U.S. Coast Guard in the United States, and be in good and serviceable condition. A water rescuer sometimes may be immersed in cold water for prolonged periods of time. They are unable to get to shore or shore is too far away, rescue is not imminent, no boat is available to get into or on top of, and no flotsam is available. The water rescuer needs to assume a defensive posture to conserve heat and increase survival time.1.1 This practice covers the recommended water rescue procedure for performing the heat escape lessening posture (HELP) position.1.2 This practice is one in a set of self-rescue techniques for the water rescuer.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Single Person Cold Water Survival/Rescue Technique: HELP Position

ASTM F1730-96(2009) 水上救生投擲包的投擲用標準指南

This guide establishes a recommended procedure for a throwing rescue to ensure the safety of all water rescuers who may be involved in rescue techniques at a water rescue emergency. This water rescue technique can be utilized from land, boat, or any stable platform. All persons who are identified as water rescuers shall meet the requirements of this guide. This guide is intended to assist government agencies, state, local, and regional organizations; fire departments; rescue teams and others who are responsible for establishing a minimum performance for personnel who respond to water emergencies. The procedure outlined in the document may vary with the number and type of victims, and water conditions.1.1 This guide covers the recommended procedures for throwing a water rescue throwbag. 1.2 This guide is one in a series of water rescue techniques for the water rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Throwing a Water Rescue Throwbag

JT/T 215-1995 水下膠粘劑技術要求和試驗方法

本標準規定了水下膠粘劑的技術性能和試驗方法。 本標準適用于海難救助、打撈和海洋工程等金屬和其他水下構筑物暫時附著固定用的膠粘劑。

Technical requirements and testing methods for underwater adhesives

JT/T 210-1995 救撈用軟管法蘭接頭

本標準規定了救撈用軟管法蘭接頭(以下簡稱法蘭接頭)的產品品種、規格和技術要求等。 本標準適用于壓力為0. 5MPa，軟管內徑分別為100mm,160mm和200mm的救撈用軟管法蘭接頭。

Flange of flexible hose for salvage

JT/T 209-1995 救撈用輸氣輸水膠管接頭

本標準規定了救撈用輸氣輸水膠管接頭的產品品種、規格，技術要求及檢驗規則等 本標準適用于公稱壓力1MPa的救撈用輸氣輸水膠管接頭(以下簡稱膠管接頭)。

Air and water rubber hose coupler for salvage

JT/T 212-1995 GN-S型船底攻泥器

本標準規定了GN-S型船底攻泥器(以下簡稱攻泥器)的產品結構、技術要求、檢驗規則和標志、包裝、運輸及貯存。 本標準適用于潛水員在打撈沉船時穿引船底鋼線繩所用的攻泥器。

GN-S Mud-penetrator under bottom

JT/T 211-1995 氣升式吸泥器

本標準規定了氣升式吸泥器的技術條件、結構尺寸及使用范圍。 本標準適用于水深8-60m的氣升式吸泥器(以下簡稱吸泥器)。

Air lift mud pump

JT/T 213-1995 SGⅢ型水下氧弧割炬

本標準規定了SGIII型水下氧弧割炬的技術要求、試驗方法、檢驗規則和標志、包裝、運輸、貯存的要求。 本標準適用于100m以淺供水下切割的SGIII型水下氧弧割炬(以下簡稱割炬)。

TYPE-SGⅢ Underwater oxygen-arccutting torch

JT/T 39-1993 浮筒打撈沉船技術要求

本標準規定了使用鋼殼圓柱形浮簡(以下簡稱浮筒)在打撈沉船工程中的技術要求。 本標準適用于海上使用浮筒打撈沉船，江河打撈沉船亦可參照使用。

Technical Requirements for Salvaging Wreck With Pontoon