GB/T 28878.9-2019 空間科學實驗轉動部件規范 第9部分：交付

Specification of the rotating component in space science experiments—Part 9：Delivery

GB/T 28878.10-2019 空間科學實驗轉動部件規范 第10部分：儲存復驗

Specification of the rotating component in space science experiments—Part 10：Storage and reinspection

GB/T 36254-2018 航空電機用標準輕型深溝球軸承

本標準規定了主要用于航空電機的標準輕型深溝球軸承的結構、尺寸和要求。 本標準適用于航空電機用標準輕型深溝球軸承的選用。

Standard light annular ball bearings primarily for aircraft generators and motor-generators

GB/T 36222-2018 航空電機用深溝球軸承通用規范

General specification for deep groove bearings of aircraft generators and motor generators

GB/T 36223-2018 航空電機用寬型深溝球軸承

本標準規定了主要用于航空電機的寬型深溝球軸承的結構、尺寸和要求。 本標準適用于航空電機用寬型深溝球軸承的選用。

Wide cartridge annular ball bearings primarily for aircraft generators and motor-generators

GB/T 36221-2018 航空電機用薄超輕型深溝球軸承

本標準規定了主要用于航空電機的薄超輕型深溝球軸承的結構、尺寸和要求。 本標準適用于航空電機用薄超輕型深溝球軸承的選用。

Thin extra light annular ball bearings primarily for aircraft generators and motor-generators

GB/T 35436-2017 空間站科學實驗柜標準模塊接口設計規范

Interface design specification for standard modules of science experiment rack in space station

GB/T 28878.6-2016 空間科學實驗轉動部件規范 第6部分：性能測試

GB/T 28878的本部分規定了空間科學實驗裝置轉動部件的測試條件、項目和順序、方法以及測試結果的數據處理。 本部分適用于空間科學實驗裝置轉動部件的性能測試。其他有效載荷及空間飛行器平臺的轉動部件性能測試可參照使用。

Specification of the rotating component in space science experiments—Part 6：Property testing

GB/T 28878.7-2016 空間科學實驗轉動部件規范 第7部分:可靠性試驗

GB/T 28878的本部分規定了空間科學實驗裝置轉動部件的可靠性試驗項目、方法和程序，以及試驗條件制定、試驗周期確定的方法和可靠性試驗的實施程序。 本部分適用于空間科學實驗裝置轉動部件地面進行的可靠性試驗。其他有效載荷和空間飛行器平臺轉動部件的可靠性試驗可參照使用。

Specification of the rotating component in space science experiments.Part 7:Reliability test

GB/T 28878.2-2016 空間科學實驗轉動部件規范 第2部分:潤滑設計要求

GB/T 28878的本部分規定了空間科學實驗裝置轉動部件的滾動軸承潤滑設計及驗證的要求。 本部分適用于空間科學實驗裝置轉動部件滾動軸承的潤滑設計。其他有效載荷和空間飛行器平臺轉動部件的潤滑設計可參照使用。

Specification of the rotating component in space science experiments.Part 2:Requirements of lubrication design

DIN EN 4694:2018 航空航天系列.整體螺栓拉桿.匯編代碼D、E和F;德文和英文版本EN 4694-2017

This standard specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range -55 °C to 85 °C. The rod ends should not be screwed completely apart.

Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F; German and English version EN 4694:2017

DIN EN 4695:2018 航空航天系列.整體螺栓拉桿.匯編代碼G、H和K;德文和英文版本EN 4695-2017

This standard specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range -55 °C to 85 °C. The rod ends should not be screwed completely apart.

Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K; German and English version EN 4695:2017

DIN EN 4693:2018 航空航天系列.整體螺栓拉桿.匯編代碼A、B和C;德文和英文版本EN 4693-2017

This standard specifies the dimensions and tolerances of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range -55 °C to 85 °C. The rod ends should not be screwed completely apart.

Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C; German and English version EN 4693:2017

DIN EN 4691-1:2018 航空航天系列.整體螺栓拉桿.第1部分:技術規范

This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod assemblies with two adjustable ends with integrated bolts, designed to withstand static and dynamic loads possible for interior and substructure in the temperature range from -55 °C to 85 °C. It is applicable whenever referenced. For a complete overview see EN 4691-2.

Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification; German and English version EN 4691-1:2017

DIN EN 4692:2018 航空航天系列.整體螺栓拉桿.鎖定夾;德文和英文版本EN 4692-2017

This standard shows the locking clips for the construction kit of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range -55 °C to 85 °C (EN 4691-2).

Aerospace series - Tie Rod with integrated bolts - Locking clip; German and English version EN 4692:2017

BS EN 4691-2:2018 航空航天系列. 帶整體螺栓的拉桿. 建筑套件概述

Aerospace series. Tie rod with integrated bolts. Overview construction kit

DIN EN 2287:2017 航空航天系列.帶自潤滑襯料耐蝕鋼制普通襯套.尺寸和負載;德文和英文版本EN 2287-2017

This European Standard specifies the characteristics of plain bushes in corrosion resisting steel with self-lubricating liner and the design recommendation of shafts and housings. The bushes are intended for operation within the temperature range of 55 °C to 163 °C and assembly with an interference fit into fixed and moving aerospace parts.

Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads; German and English version EN 2287:2017

BS EN 6076:2017 航空航天系列. 抗磷酸酯模制乙烯-丙烯直螺紋管接頭支管臺的靜態密封構件O型圈(-55℃至107℃). 英制系列

Aerospace series. Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 C to 107 C) - Inch series

ISO 9538:2017 航空航天系列.液壓管路安裝接頭及管接頭.平面彎曲試驗

Aerospace series - Hydraulic tubing joints and fittings - Planar flexure test

BS EN 6029:2017 航空航天系列. 單叉UNJ螺紋柄可調連桿端頭, 最小嚙合量: 1,5螺紋直徑, 耐腐蝕鋼. 尺寸與載荷. 英制系列

Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel. Dimensions and loads. Inch series